| MEGAN
RACING INTERCOOLERS | | |
 | 
| Megan
Racing Large Aluminum Intercoolers are the perfect component to handle your
custom forced induction project needs. Constructed from a durable aluminum alloy,
the large core face offers exceptional cooling properties to cool down the air-charge
before it enters the intake manifold, allowing for higher boost pressure and power
gains. Megan Racing offers two sizes of Aluminum Intercoolers; the smaller intercooler
features a core measuring 17.5”x 11.75”x 3” with end tanks that
taper from 1-2” to reduce turbulence and increase airflow. The Inlet-to-Outlet
length comes to 22” with 3”OD Inlet/Outlets. The large intercooler features
a 23.5”x 11.75” x3” core with similar end tanks which brings the
inlet-to-outlet length to 28.5”. These intercoolers were designed with a
large face area and a relatively small depth to aid in fitment, as one of the
most common problems found with intercooler installations is the limited space
available. In most cases our intercoolers are thin enough to require no bumper
or bumper support modification at all. All of our intercoolers come with four
tapped mounting holes (two on top and bottom of core) to ease installation as
well. While the natural aluminum finish and clean welds offer a clean visual appearance
for any show car. Size:
28"x11.75"x3" Oulet: 3" Inlet: 2.75" Large
Universal Intercooler-Retail $300 on Sale for $260 
|
|
| Megan
Racing Small Aluminum Intercoolers are the perfect component to handle your
custom forced induction project needs. Constructed from a durable aluminum alloy,
the large core face offers exceptional cooling properties to cool down the air-charge
before it enters the intake manifold, allowing for higher boost pressure and power
gains. Megan Racing offers two sizes of Aluminum Intercoolers; the smaller intercooler
features a core measuring 17.5”x 11.75”x 3” with end tanks that
taper from 1-2” to reduce turbulence and increase airflow. The Inlet-to-Outlet
length comes to 22” with 3”OD Inlet/Outlets. The large intercooler features
a 23.5”x 11.75” x3” core with similar end tanks which brings the
inlet-to-outlet length to 28.5”. These intercoolers were designed with a
large face area and a relatively small depth to aid in fitment, as one of the
most common problems found with intercooler installations is the limited space
available. In most cases our intercoolers are thin enough to require no bumper
or bumper support modification at all. All of our intercoolers come with four
tapped mounting holes (two on top and bottom of core) to ease installation as
well. While the natural aluminum finish and clean welds offer a clean visual appearance
for any show car.
Size: 22"x11.75"x3" Oulet:
3" Inlet: 2.75"Small
Universal Intercooler-Retail $300 on Sale for $240
|
|
| |
| | |
